Steel Tooth Tricone Bits   

                                                         
IADC 1 Series Tricone Bits

                                                         
Product Description:
These bits are used to drill low-compressive strength, soft formation (like soft shale, clay, salt rock…etc.).
1) Long projection theeth are lengths used on high offset cones to provide the greatest penetration rates possible.    

2) Wear-resistant hard facing is used to control tooth wear.
3) Durable hard facing is applied to reduce tooth wear.

Size Available:
From 3 7/8”(98.4mm) to 26”(660.4mm).

NOTE:
Sizes and types that are not shown above can be customized according to specific drilling requirements.